phyCORE®-MPC5200B I/O

Contact us to learn more

Call 1-800-278-9913
to talk to a technical sales engineer

The phyCORE-MPC5200B tiny SOM is populated with the high-performance, 32-bit RISC NXP MPC5200B processor highlighted by its ultra-low power consumption and real-time support. The two 220-pin high-density Molex connectors extend controller and board-level signals for access to circuitry common to embedded applications including DDR memory, Ethernet, USB, CAN, and more.

The phyCORE-MPC5200B I/O System on Module

The MPC200B PowerPC Family
The NXP MPC5200B features MPC603e series processor core built on Power® Architecture technology. Complimented by a double precision Floating Point Unit (FPU), the MPC5200B delivers up to 400 MHz performance while highlighting a hardware Memory Management Unit (MMU) for fast task switching, BestComm DMA controller for intensive data transfers, and a packed set of integrated peripherals.

SOM Highlights

MPC5200B up to 400 MHz
Altera Cyclone II FPGA (on-board)
Up to 128 MB DDR / 64 MB Flash
USB FS 1.1 Host
Ethernet
ATA 1.0
CAN, UART, I2S
Linux BSP

View all less specs

Feature	Details
Part Number	PCM-032
Architecture	PowerPC
Processor	NXP MPC5200B
Frequency	400 MHz
SRAM	2 MB max
DRAM	128 MB default DDR
NAND	–
NOR	32 MB default / 64 MB max
eMMC	–
EEPROM	4 KB
SD/SDIO/MMC	–
PCMCIA/CF	1
PCIe	–
SATA	–
UART	2 (6 with special modification)
RS-232	2
I2C	2
I2S	1
SPI/SSP	1
CAN	2
USB Host	1x FS 1.1 (no PHY)
USB Device	–
USB OTG	–
Ethernet (Mbit/s)	10/100
Audio	External
Graphics	–
Video	–
Display	–
Touch	–
Camera	–
RTC	Yes
Miscellaneous	FPGA, PCI 2.2, DMA, JTAG
Dimensions	57 x 84 mm
Connector	2x 200-pin 0.635 mm pitch
Supply Voltage	3.3 V
Power Consumption	4 W
Temperature	-40° to +85° C

The Interconnect

phyCORE-MPC5200B interfaces are routed to our high-density PCB interconnects on the underside of the SOM. Design the mating connectors on your carrier board.

The phyCORE-MPC5200B I/O Rapid Development Kit

Kit Contents

phyCORE-MPC5200B-I/O System on Module
phyCORE-MPC5200B-I/O Carrier Board
Linux Software
ALTERA Byte-Programmer
Optional expansion board
Cables, schematics, and kit CD

The phyCORE SOM is designed to plug into a PHYTEC Carrier Board that provides the I/O connectors as well as any other interface circuitry not provided on the phyCORE module itself.

Carrier Board Features

RJ-45 Ethernet
USB 1.1 Host port
2x RS-232 serial ports
Compact Flash card socket
PCI connector
Stereo input and output jacks
2x CAN connectors
ATA interface
IDE interface connector
JTAG connector
Expansion interface

SOM Features

The default configuration for the phyCORE-MPC5200B I/O SOM included in the kit features: Freescale Power Architectures MPC5200B 400 MHz processor, 128 MB SDRAM, 32 MB NOR-Flash, 2 MB SRAM, Ethernet, FPGA (EP2C8), dual RS-232, and industrial temperature range.

Optional Accessories
Bare PCB expansion board that plugs into the Carrier Board for rapid prototypting