Contact us to learn more
to talk to a technical sales engineer
The phyCORE-MPC5554 SOM integrates the 32-bit NXP MPC5554 PowerPC® microcontroller on an advanced PCB. A solution for balance between cost-efficiency and complex calculation intensive processing, the phyCORE-MPC5554 features Lattice XP FPGA logic elements. Interfaces including Ethernet, I2C, SPI, FlexCAN, SCI UARTs, and other multi-purpose I/O signals can be accessed with ease by the two 220-pin high-density Molex connectors.
Take a closer look
The phyCORE-MPC5554 System on Module
The MPC5554 PowerPC MicrocontrollerThe NXP MPC5554 microcontroller features the high-performance e200z6 CPU, built upon Power Architecture® technology, at its core. Designed to handle complex applications and provide real-time control, the MPC5554 delivers up to 132 MHz and offers advanced on-chip functionality including a large amount of embedded flash, enhanced timer systems, and a rich peripheral set.
- MPC5554 up to 132 MHz
- Enhanced Timer Systems (eTPU)
- Up to 16 MB SRAM
- Up to 8 MB Flash
- FlexCAN, SCI UART
- SPI, I2C
- Multi-purpose I/O
- Lattice XP FPGA logic elements
|SRAM||2 MB default / 16 MB max|
|NOR||8 MB default|
|Miscellaneous||FPGA, DAC(12-bit), JTAG/Nexus|
|Dimensions||84 x 57 mm|
|Connector||2x 200-pin 0.635 mm pitch|
|Supply Voltage||3.3 & 5.0 V|
|Power Consumption||3.3 W|
|Temperature||-40° to +85° C|
phyCORE-MPC5554 interfaces are routed to our high-density PCB interconnects on the underside of the SOM. Design the mating connectors on your carrier board.
The phyCORE-MPC5554 Rapid Development Kit
- phyCORE-MPC5554 System on Module
- phyCORE-MPC5554 Carrier Board
- Optional expansion board
- Cables, schematics, and kit CD
The phyCORE SOM is designed to plug into a PHYTEC Carrier Board that provides the I/O connectors as well as any other interface circuitry not provided on the phyCORE module itself.
Carrier Board Features
- RJ-45 Ethernet
- 2x RS-232 serial ports
- 2x CAN connectors
- User buttons and LEDs
- FPGA JTAG interface
- OnCE / JTAG / Nexus interface
- Power LEDs
- RESET and IRQ push buttons
- Expansion interface
The default configuration of the phyCORE-MPC5554 SOM included in the phyCORE-MPC5554 kit features: Freescale Power Architectures MPC5554 132 MHz microcontroller, 8 MB Flash, dual CAN transceivers, Ethernet, and FPGA.
- Bare PCB expansion board that plugs into the Carrier Board for rapid prototypting
P&E Mico PKGPPC Nexus Starter Edition Software
- GNU C Compiler Collection for Qorivva e200z6
- Windows IDE
- Flash/EEPROM Programmer
- In-circuit debugger
- Register File Viewer/Editor
- Software demos
View PHYTEC certifications for ISO9001:2008, RoHS II, Conflict Minerals, and more here.
Find Quickstart guides, BSP downloads, and other useful information on our wiki.
Welcome to PHYTEC support! We pride ourselves in our excellent customer service. If you cannot find the help you need here, please call us and we will connect you with a live person who can assist you.
Need schematics for one of our products? Register here.