ARM® Cortex®-A7 SOM
Contact us to learn more
to talk to a technical sales engineer
The industrial phyCORE-i.MX 6UL is based on the NXP i.MX 6UltraLite processor. PHYTECs lowest power SOM to date, with power consumption under 500mW in idle mode, is well suited energy-efficient and compact applications such as HMI, control systems, and IoT. The SOM has been designed with solder contacts around the outside for easy integration and reduced system cost.
Take a closer look
The phyCORE-i.MX6UL System on Module
The i.MX 6UL Processor Family
The NXP i.MX 6UL Series expands the i.MX 6 Series by adding a high performance but ultra low power embedded processor which is based on ARM® Cortex™-A7 technology. Along with providing standard IO the i.MX6 UL applications processor also includes an integrated power management module.
- i.MX 6UL
- WXGA/HD (1366 x 768) Video
- Up to 2 GB DDR3
- Up to 2 GB NAND
- Dual 10/100 Mbit Ethernet
- Dual SD/SDIO/MMC
- Dual 2 USB 2.0 OTG
- Display interface
- Camera interface
- CAN, UART, SPI, I2C, SAI, ADC, PWM
- Linux BSP
|Processor||i.MX 6UL / i.MX 6ULL|
|Frequency||696 MHz / 900 MHz|
|DRAM||512 MB default / 2 GB max DDR3|
|NAND||512 MB default / 2 GB max DDR3|
|USB OTG||2x HS 2.0|
|Ethernet (Mbit/s)||2x 10/100 (1x PHY on SOM)|
|Video||WXGA/HD (1366 x 768)|
|Display||TTL (24 bpp)|
|Miscellaneous||ADC, Tamper Detection, 8x PWM, GPIO, JTAG|
|Dimensions||36 x 36 mm|
|Connector||159-pin 1 mm pitch scalloped edge|
|Supply Voltage||3.3 V|
|Power Consumption||500mW (idle mode)|
|Temperature||-40 to 85°C|
phyCORE-i.MX6UL interfaces are routed to solder contacts around the outside edge of the PCB. The SOM can be directly soldered to your carrier board.
The phyCORE-i.MX6 Single Board Computer Kit
- phyCORE-i.MX6UL System on Module
- phyBOARD-i.MX6UL-Segin Single Board Computer Carrier Board
- Linux BSP
- Evaluation Module: Provides RS-232, User buttons and LED, JTAG
To evaluate the phyCORE-i.MX6UL SOM it is directly soldered to a PHYTEC Carrier Board that provides the I/O connectors as well as any other interface circuitry not provided on the phyCORE module itself.
Carrier Board Features
- 2x RJ45 Ethernet
- USB Host (Standard-A Connector)
- USB-OTG (Micro-AB Connector)
- Micro-SD Card Slot
- LCD interface (24-bit TTL)
- Parallel Camera Interface
- RTC battery backup
- Expansion interface
The default configuration of the SOM included in the phyCORE-i.MX6UL kit features: NXP i.MX 6UL-G2 processor, 512 MB DDR3, 512 MB NAND, 4 KB I2C EEPROM, Dual 10/100 Ethernet PHY, and industrial operating temperature rating.
phyCORE-i.MX6UL Board Support Packages
PHYTEC Board Support Packages (BSPs) are software bundles that implement and support operating systems on our System on Modules. PHYTEC BSPs are application development-ready, offering all essential drivers and board-level feature support. The only task left for you is application integration. This way, you can focus on your core competencies while we take care of the rest.
- Yocto Project Support
- Bootloader, kernel, file system
- Source BSP
View PHYTEC certifications for ISO9001:2008, RoHS II, Conflict Minerals, and more here.
Find Quickstart guides, BSP downloads, and other useful information on our wiki.
Welcome to PHYTEC support! We pride ourselves in our excellent customer service. If you cannot find the help you need here, please call us and we will connect you with a live person who can assist you.
Need schematics for one of our products? Register here.